If the AJA device supports a LUT (e.g.If you are switching between multiple AJA devices, be sure to check the format selection after you switch to a new device (all devices don’t support the same formats).If you change AJA device parameters, click the ‘Refresh Current Pattern’ link on the VirtualForge menu to update the device data in the VirtualForge software.Use the AJA Control Panel to select AJA output signal options, including output resolution and frame rate.The video output characteristics of each AJA video output device controlled by VirtualForge are determined by the individual AJA device and by the AJA Control Panel Application.AJA ControlPanel app and unified device driver.Version 12.4.0 Hardware Driver, or newer.Note: Ensure the AJA Control Panel is closed when using VirtualForge, it can interfere with the connection to VirtualForge AJA Video Systems Driver Requirements Note: AJA Video Systems reports that some Mac computers cannot connect to the T-Tap in Windows running in Boot Camp Io 4K or KONA 4) with an RGB-8 or RGB-10 pixel format, see the Pixel Format note under AJA General Information, in Appendix B. * If you are using an AJA device that supports a LUT (e.g.
Use the manufacturer’s control app to select device output signal options, including output resolution and frame rate. Note: The video output characteristics of each video output device controlled by VirtualForge are determined by the individual device and by its associated control app.Note: Before launching the VirtualForge software, be sure to install the proper software/driver for the AJA or BMD video output device.
0 kommentar(er)
